Compressor Oils

Compressor Oil Cetus DE 100: 20 Litres - 1350220

All prices exclude GST.

Product Code:- 1350220

Availability: 3 Days delivery

Toowoomba

Caltex

$350.10 / 20 Litres

(Prices exclude GST)

To order by email please e-mail sales@jtdrilling.com.au

Product Description

Cetus DE Oils are premium performance, synthetic compressor oil based on diester technology and containing an inhibitor system to give outstanding oxidation resistance and corrosion protection under severe operating conditions.

Cetus DE lubricants are available in ISO viscosity grades 68 and 100.

RECOMMENDED FOR

Rotary air compressors

Reciprocating air compressors

Medium speed marine diesel engine turbochargers.

General industrial applications where non-EP synthetic products with outstanding oxidation properties are required, e.g., hydraulic systems, oil mist lubrication systems, industrial gear cases

Not recommended for use in breathing air compressors.

PRODUCT BENEFITS

Extended oil service life: Outstanding oxidation stability of the diester base fluid and inhibitor system resists oil breakdown at the elevated temperatures encountered in compressor service, permitting oil drain intervals to be extended beyond those achieved with conventional lubricants

Minimum maintenance and downtime: Diester base fluid ensures an effective oil film to protect highly loaded parts against wear under high temperature operating conditions, as well as during low temperature start-up. The inhibitor system provides excellent rust and corrosion protection under all conditions.

Trouble-free operation in severe service: Outstanding thermal and oxidation stability enable the diester lubricant to resist deposit formation in the heat of the compression cycle, even under the most severe service conditions.

PERFORMANCE CHARACTERISTICS

Matsubara Approval (ISO 100)

Tanabe Approval: H-series reciprocating marine compressors (ISO 100)

Meets the individual requirements of other major manufacturers of both rotary and reciprocating compressors

KEY PROPERTIES
ISO Grade	46	68
Density at 15°C, kg/L	0.842	0.850
Flash Point, COC, °C	249	260
Pour Point, °C	-50	-48
Viscosity, cSt at 100°C	8.1	10.4
Viscosity, cSt at 40°C	49.2	68.7
Viscosity Index	135	138

SERVICE CONSIDERATIONS

Cetus DE Oils are designed to meet the requirements of modern higher output, more efficient compressors. These newer units are more compact and operate at higher speeds than older compressors. As a result, higher temperatures are experienced. As temperatures increase, deposit formation on valves and air separators can also increase. Operators of these newer compressors using Cetus DE Oils will experience minimal carbon, varnish and sludge deposits on valves and air separators.

Cetus DE Oils are compatible with conventional, non-detergent petroleum oils, although mixing will reduce the thermal and oxidation stability of the synthetic lubricant. However, it may not be compatible with seals, paints, plastics, etc., found in systems designed for petroleum oils. Where doubt exists, the equipment manufacturer should be consulted concerning compatibility with diester-based lubricants.

Diesters have excellent solvency and will aggressively "clean-up" systems deposits that might have formed while mineral oil based lubricants were in use. Therefore, oil filters need to be monitored frequently in the early stages after conversion to this product.

ENVIRONMENT, HEALTH AND SAFETY

A Material Safety Data Sheet (MSDS) is available for each product. Use the links in the table above to view them. Users should consult the MSDS, follow the precautions outlined and comply with all laws and regulations concerning its use and disposal. Used packaging material should not be incinerated or exposed to flame. After use, protect your environment. Do not pollute drains, soil or water with used product.

RETURN TO COMPRESSOR OILS PAGE

RETURN TO PRODUCTS PAGE

RETURN TO HOME PAGE

JT Drilling has its own fully equipped workshop ensuring all our equipment will perform with maximum efficiency. We also have an equipment hire division contact us for further details.

PHONE 07 4630 0450

For all enquiries please e-mail enquiries@jtdrilling.com.au

To order by email please e-mail sales@jtdrilling.com.au

To order by online form please go to ORDERS

OFFICE:- ZIMMS CORNER 11301 WARREGO HIGHWAY GOWRIE MOUNTAIN QLD 4350

HOME PAGE DRILLING PRODUCTS LUBRICANTS ORDER ABOUT US CONTACT US SITE MAP